Hillbilly Stills BBB Business ReviewOfficial PayPal Seal
Online Payments



  Home > Copper Distillers > Pot stills >

  2" Simple Pot Still Head



 
Our Price: $275.00
You'll earn 50 points

Availability: Usually Ships in 2 to 3 Weeks
Product Code: PSH2


I AgreeBuyers assumes any and all liability. Distilling equipment may not be legal for use in some areas.Hillbilly Stills strongly discourages any unlawful use, and is not responsible for any damage or injury caused by misuse or unlawful use. Hillbilly Stills is required by law to report all still sales to the TTB. Any person who uses information or products provided by Hillbilly Stills whether in this website, or elsewhere do so entirely at their own risk

Qty:  
Description
 
This is a all Copper simple pot still head 2" column 12" long with 26" Leibeg condenser. The Leibeg condenser attaches with a copper union. This makes for easy storage. This comes with a 2" tri-clamp and will fit the top of a Sankey beer keg. The base of the column of our Moonshine stills come with a stainless steel sanitary fitting for long life. You can put this on and take if off your boiler with no wear on the copper. This is a very simple design to operate and is very similar to the Moonshine Still of the old days just on a much smaller level.
Features
  • Included are:
    • 26 inch Leibeg condenser
    • 12 inch pot still column 2"diameter
    • 2" tri clamp
    • 2" EDPM O-Ring


Average Customer Review: 5 of 5 | Total Reviews: 8 Write a review.

  0 of 0 people found the following review helpful:
 
2" pot still March 15, 2013
Reviewer: caleb from springfield, OR United States  
great still,very well designed and put together
excellent service also.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
wow March 14, 2013
Reviewer: b Noles from Indianapolis, IN United States  
just got mine and the craftsmanship and quality look great can't wait to try it out.!!!
 way better than i thought it would be!!!!!!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
great product March 9, 2013
Reviewer: Jacob mcmasters from port washington, OH United States  
I love the still head it works great. Only thing I don't like is the gasket. When I tried attaching it to my keg I could not with all my might push down hard enough to get the clamp on. I cut the lip off of The gasket and now it works fine. Other than that no problems. Great job hillbilly stills.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
Good Product February 27, 2013
Reviewer: Demodenny from Motown USA  
The still was packed nicely and it was pretty clean for the most part. It got a little sloppy where the stainless piece attaches to the bottom but I was able to clean it up fairly easily.
Overall I am happy with the performance and ease of use with the 2 inch pot still.
One recommendation, on the 90 degree fitting of the Leibeg try to use a heavier or reinforced fitting in that area, I see that as the weak link in the setup but overall a very nice piece.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
2" welding ferrule February 4, 2013
Reviewer: Randall Rice from Stroudsburg, PA United States  
2" ferrule was out of stock so I received a couple bags of turbo yeast instead. Won't use the yeast but could have used the ferrule.

Was this review helpful to you?

View All Customer Reviews

Browse for more products in the same category as this item:

Copper Distillers > Pot stills
Copper Distillers