Fittings

You are here: Home > Fittings

Sort By:

Page of 1

3/8 OD Poly tubing

Our Price: $1.25

3/8" OD Poly Tubing for the push fittings. This works great for you water lines. Easy to remove and Easy to set up. The price of this Tubing is per foot.

Push to Connect Male fitting

Our Price: $4.75

NITRA (tm) one push-to-connect male 90degree fitting with nickel-plated brass hex body, internal hex socket, stainless steel tube gripping claws, and pre-applied teflon thread sealant. For use with 3/8" inch outside diameter polyurethane or nylon tubing and 3/8 inch NPT threaded connection. To see a demonstration on how these work click Here

Brass hose barb sets

Our Price: $6.75

These high quality Hose barb sets 5/8" barb end and standard 3/4"NPT Garden hose end Male and Female in one set. They come with the Gasket included. These are high quality enough for soldering also. Ream the inside of the barb end just slightly for a really nice fit over 3/8" copper and solder. Or just use them to repair your hoses. The same quality you get in others that cost $11.00 per set at the big box stores

Push to Connect / tubing Kit

Our Price: $16.99
Sale Price: $12.50
Save $4.49!

With this kit you will receive 2 Push to Connect fittings and 2 Feet of tubing

3/8" npt threads and 3/8" tubbing end.

Sanitary Thermowell

Our Price: $40.00
Sale Price: $25.95
Save $14.05!

1/2 Inch NPT Sanitary Thermo-well. This comes with a 3" stem. Your bimetal thermometer will screw into this with no leaks. This has 1/2 inch NPT threads for the thermometer and fits any 1.5" sanitary fitting.

2 x 1.5 inch Stainless adapter

Our Price: $45.00
Sale Price: $30.00
Save $15.00!

This is a adapter that will allow you to use the funnel from your Carbon Filter system as a funnel for your boiler. You refill via the filler neck on the boiler. This will help you make your funnel system a multi use piece of equipment

2in Stainless ferrule to copper pipe coupling

Our Price: $34.50
Sale Price: $32.50
Save $2.00!

2 " Stainless Steel Ferrule Silver soldered to 2 inch copper pipe with coupler.

3in Stainless ferrule to copper pipe coupling

Our Price: $47.50
Sale Price: $43.50
Save $4.00!

3 " Stainless Steel Ferrule Silver soldered to 3 inch copper pipe with coupler.

3 x 2 Stainless adapter

Our Price: $65.00
Sale Price: $45.00
Save $20.00!

This is a adapter to go from 3 inch column to a 2 inch that will fit Sankey beer Kegs. It is all stainless steel so it will not wear out from changing out often. This does not include the clamps or PTFE seals. You will need to order those separate if you need them.

2 INCH STAINLESS BALL VALVE

Our Price: $63.50
Sale Price: $59.95
Save $3.55!

This is a 304 Stainless Steel Ball Valve. Attach this to a 2" Ferrule on the bottom of your kettle and you have a very nice drain valve.