|
|
|
|
|
|
Heating element conversion plate
|
Our Price: $14.50
|
|
|
2" cap for installing electric element in the new boilers. You can also install a 2" ferrule into your existing boiler and use the plate to install your heating element. Installs with standard seal and and tri-clamp. These were made for Hillbilly Stills.
|
|
|
|
|
|
|
|
|
|
Thermometer Boiler Adapter
|
Our Price: $21.00
Sale Price: $19.50
Save $1.50!
|
|
|
This Adapter will allow you to add any thermometer that will fit 1/2" NPT fitting. Our Taylor 3" dial thermometers will fit perfectly. This adapter fits the 1.5" filler neck .
|
|
|
|
|
|
|
|
|
|
Boiler Stand for 26 Gallon Boiler
|
|
Our Price: $125.00
|
|
|
This is a very nice Stainless Steel stand for your 26 gallon boiler. It will raise your boiler 16" Off the floor making it very easy to drain the boiler when finished. It also looks very nice and makes your entire set up look very professional. This comes unassembled for shipping. You will have to install 12 bolts. Very easy to set up.
|
|
|
|
|
|
|
|
|
|
Carbon filter Funnel System
|
|
Our Price: $135.00
|
|
|
Here is our Carbon Filter system. This consist of the 2 inch stainless pipe with a removable screen in the bottom. You can attach this to your boiler and filter 2 gallons of spirit at a time with no worries about spills. This will attach directly to the 8 gallon boilers, or if you have one of our larger boilers you can get one of our 3 x2 stainless reducers and attach it to your boiler.
The filter tube is 24" tall and great for our 1 pound bag of Hillbilly Stills premium grade activated carbon. The funnel that attaches to the top of the tube will hold 2 gallons of product and can also be used as a funnel to fill your boiler with no spills.
We suggest using a coffee filter just below the bottom of the filter tube. I think you will find this a very nice addition to your distilling gear.
|
|
|
|
|
|
|
|
|
|
8 Gallon Mash Pot with Domed lid and fitting for electric element
|
|
Our Price: $250.00
|
|
|
This is a premium mirror polished Mash Pot inside and out. It will come with a 2 inch tri-clover fitting located near the bottom of the Mash Pot for adding a Electric element or a drain. It will come with a cap and tri- clamp. It will also have a domed lid with 2" tri-clover for attaching your column.
13" diameter x 22" tall
|
|
|
|
|
|
|
|
|
|
13 gallon Mash Pot with filler neck, Drain, and fitting for electric element
|
Our Price: $425.00
Sale Price: $375.00
Save $50.00!
|
|
|
This is a premium mirror polished inside and out 13 gallon Mash Pot with drain, filler neck, and also has fitting for electric heating element. This Mash Pot comes with a domed lid and a 3 inch sanitary fitting on the domed lid.
|
|
|
|
|
|
|
|
|
|
26 Gallon Mash Pot with Drain, Filler Neck, and Fitting for electric element
|
|
Our Price: $550.00
|
|
|
Big Bertha -This is a premium mirror polished inside and out 26 gallon Mash Pot with drain, filler neck, and also has fitting for electric heating element. This Mash Pot comes with a domed lid and a 3 inch sanitary fitting on the domed lid. The dimensions of this are 19.5" diameter and 29.5" tall from the base to the top of the lid.
|
|
|
|
|
|
|
|
|
|
50 Gallon Boiler
|
|
Our Price: $5,925.00
|
|
|
This is a very well built 50 Gallon kettle, mirror polished inside and out. It is Jacketed with 1.5" of insulation inside the jacket to make this more efficient. It has a 13" Man way to allow cleaning without removing your distillation column and a 4" ferrule for easy attachment of your four or six plate Hillbilly Flute. It is equipped with two 2" ferrules near the bottom for installing your HS11000 internal heating element(s). It also has an added attachment area on top to add an agitator. The drain is located on the very bottom of its conical shaped bottom and is plumbed to the side for easy access to the drain valve. It is made from 4mm thick 304 Stainless steel, double walled and insulated. This product is for your serious distiller wanting to produce larger amounts of distillate. This kettle is special order only with a minimum of a three month delivery time. This Kettle is designed for use with direct electric heat only!!! Steam, oil, or gas will not work due to the Insulation!!!!!
|
|
|
|
