|
|
|
|
|
|
Hillbilly Stills Training / Demo DVD for HILLBILLY FLUTE
|
|
Our Price: $9.95
|
|
|
This is a DVD demonstrating the Hillbilly Flute assembly and Operation. This a much more comprehensive look at the Hillbilly Flute.
This Video is not on you-tube. you can only get it by purchasing the video or the Hillbilly Flute.
|
|
|
|
|
|
|
|
|
|
2" Simple Pot Still Head
|
|
Our Price: $199.99
|
|
|
This is a all Copper simple pot still head 2" column 12" long with 26" Leibeg condenser. The Leibeg condenser attaches with a copper union. This makes for easy storage. This comes with a 2" tri-clamp and will fit the top of a Sankey beer keg. The base of the column of our Moonshine stills come with a stainless steel sanitary fitting for long life. You can put this on and take if off your boiler with no wear on the copper. This is a very simple design to operate and is very similar to the Moonshine Still of the old days just on a much smaller level.
Included are: - 26 inch Leibeg condenser
- 12 inch pot still column 2"diameter
- 2" tri clamp
- 2" EDPM O-Ring
|
|
|
|
|
|
|
|
|
|
Gin Basket Add on
|
|
Our Price: $300.00
Sale Price: $225.00
Save $75.00!
|
|
|
This is a add on for the hillbilly flute. It is accessible Via tri clamp on the top above the dephlemator. This is about 5 inches long and has a copper perforated bottom. Add a bag of your favorite herbs for flavor. This will fit all columns that were purchased after Sept. 2011.
|
|
|
|
|
|
|
|
|
|
2" Simple Pot Still Head / With thermoport
|
|
Our Price: $245.00
|
|
|
This is a all Copper simple pot still head 2" column 12" long with 26" Leibeg condenser. The Leibeg condenser attaches with a copper union. This makes for easy storage. This comes with a 2" tri-clamp and will fit the top of a Sankey beer keg. The base of the column of our Moonshine stills come with a stainless steel sanitary fitting for long life. You can put this on and take if off your boiler with no wear on the copper. This is a very simple design to operate and is very similar to the Moonshine Still of the old days just on a much smaller level. This is the same pot still head but has a Thermoport added. The thermometer is not included and must be ordered separately
Included are: - 26 inch Leibeg condenser
- 12 inch pot still column 2"diameter
- 2" tri clamp
- 2" EDPM O-Ring
|
|
|
|
|
|
|
|
|
|
Simple Pot Still Head 3"
|
|
Our Price: $299.00
Sale Price: $299.00
|
|
|
This is a all Copper simple pot still head 3" column 12" long with 26" Leibeg condenser. The Leibeg condenser attaches with a copper union. This makes for easy storage. The base of the column of our Moonshine stills come with a stainless steel sanitary fitting for long life. You can put this on and take if off your boiler with no wear on the copper. This is a very simple design to operate and is very similar to the Moonshine Still of the old days just on a much smaller level.
Included are: - 26 inch Leibeg condenser
- 12 inch pot still column 3"diameter
- 3" tri clamp
- 3" silicone gasket
|
|
|
|
|
|
|
|
|
|
Simple Pot Still Head 3" / With Thermoport
|
|
Our Price: $345.00
Sale Price: $325.00
Save $20.00!
|
|
|
This is a all Copper simple pot still head 3" column 12" long with 26" Leibeg condenser. The Leibeg condenser attaches with a copper union. This makes for easy storage. The base of the column of our Moonshine stills come with a stainless steel sanitary fitting for long life. You can put this on and take if off your boiler with no wear on the copper. This is a very simple design to operate and is very similar to the Moonshine Still of the old days just on a much smaller level. This is the same 3" Pot Still head with the thermoport added. Thermometer is not included.
Included are: - 26 inch Leibeg condenser
- 12 inch pot still column 3"diameter
- 3" tri clamp
- 3" silicone gasket
|
|
|
|
|
|
|
|
|
|
Add A Plate 2 plate section For Hillbilly Flute Only
|
|
Our Price: $475.00
Sale Price: $425.00
Save $50.00!
|
|
|
Here is the answer for the distillers that wants one still that is very versatile. With this you can make your 4 plate Hillbilly Flute a 6 plate column and gain from 2-4% ABV on a single run. Or you can make your 6 plate a 8 plate. This Add-a-Plate section will connect to your column via Tri- Clamp at the top of your column.
Be sure you order a extra 4" tri-clamp and gasket for this. These are not included.
|
|
|
|
|
|
|
|
|
|
8 Gallon Copper Moonshine Still Kit / Without burner
|
|
Our Price: $445.00
|
|
|
If you're looking for a starter copper
still for sale and you already have a heat source, this is the kit for you. Our 8 gallon moonshine kit is the
perfect beginner set up and one of our most popular copper moonshine
stills for sale. This beginner moonshine kit will allow you to easily
start crafting your very own spirits in no time and serves as a great
small whiskey still too. Our 8 gallon copper moonshine still comes with two Bags of Hillbilly Stills Turbo
Yeast, an eight gallon mash pot with domed lid, hose kit and a two inch
copper pot still head. You will also receive an instruction manual
providing you with directions on how to operate your new 8 gallon pot
still.
You will recieve - 8 Gallon Mash pot with domed lid
- 2 Inch Copper pot still head
- 2 bags of Hillbilly Stills Turbo Yeast
- Hose kit
- Instructions
|
|
|
|
|
|
|
|
|
|
8 Gallon Copper Moonshine Still Kit / With Burner
|
|
List Price: $550.00
Our Price: $520.00
Save $30.00!
|
|
|
If you're looking for a starter copper still for sale, we've got the answer. Our 8 gallon moonshine kit is the perfect beginner set up and one of our most popular copper moonshine stills for sale. This beginner moonshine kit will allow you to easily start crafting your very own spirits in no time and serves as a great small whiskey still too. Our 8 gallon copper moonshine still comes with a Bayou Classic Propane burner, two Bags of Hillbilly Stills' Turbo Yeast, an eight gallon mash pot with domed lid, hose kit and a two inch copper pot still head. You will also receive an instruction manual providing you with directions on how to operate your new 8 gallon pot still.
You will recieve - 8 Gallon Mash pot with domed lid
- 2 Inch Copper pot still head
- 2 bags of Hillbilly Stills Turbo Yease
- Bayou Classic propane burner
- Hose kit
- Instructions
|
|
|
|
|
|
|
|
|
|
13 Gallon Copper Moonshine Still Kit / without Heat Source
|
|
Our Price: $625.00
|
|
|
If you’re looking for a high quality copper moonshine still for sale, but you’re on a budget, this is the set up for you. Our 13 gallon copper moonshine still kit is the perfect beginner set up and one of our more popular copper stills for sale. This great moonshine still kit includes almost everything you need to get started on you first home distilling run. With this complete kit you get a three inch copper pot still head, 13 gallon mash pot boiler, all of the necessary hoses and connectors. No need to set all day with this baby. With the included three inch head you will get a nice take off speed. All you need is a water supply, Your own heat source and your ready.We guarantee this set up will give you years of great service and enjoyment. If you’ve been searching for a great moonshine still for sale, this is it!
Add one our fermenter starter kit a Bayou Classic burner and you have everything you need to get started on your first spirit run in no time.
Here is What you Get
- 3 Inch copper pot still head
- 3 Inch tri clamp
- 3 Inch PTFE Teflon gaskets
- 13 Gallon Mash Pot Boiler
- Hose Kit
|
|
|
|
|
|
|
|
|
|
4" Pot still with 3" final product Condenser
|
|
Our Price: $1,100.00
Sale Price: $950.00
Save $150.00!
|
|
|
Here is our 4" Pot Still Head. This comes with a 3" final condenser that will handle all the vapor you can put through it. This unit comes with our 3" thermometer.This will fit directly to our 50 gallon Kettle or our 26 gallon kettle.
|
|
|
|
|
|
|
|
|
|
13 Gallon Copper Moonshine Still Kit / 13 gallon Kettles
|
|
Our Price: $1,150.00
|
|
|
If you’re looking for a high quality copper moonshine still for sale, but you’re on a budget, this is the set up for you. Our 13 gallon copper moonshine still kit is the perfect beginner set up and one of our more popular copper stills for sale. This great moonshine still kit includes almost everything you need to get started on you first home distilling run. With this complete kit you get a three inch copper pot still head, 13 gallon mash pot boiler, HS5500 controller and element Kit, two bags of Hillbilly Stills’ Turbo Yeast and all of the necessary hoses and connectors. No need to set all day with this baby. With the included three inch head you will get a nice take off speed. All you need is a water supply, electricity and your favorite spirit recipe. This little bad boy runs 220 volt electricity too and with the heating system you will be up to speed and running in 30 minutes of warm up time. We guarantee this set up will give you years of great service and enjoyment. If you’ve been searching for a great moonshine still for sale, this is it!
Add one our fermenter starter kit and you have everything you need to get started on your first spirit run in no time.
Here is What you Get
- 3 Inch copper pot still head
- 3 Inch tri clamp
- 3 Inch PTFE Teflon gaskets
- 13 Gallon Mash Pot Boiler
- HS5500 Controller and Element Kit
- 2 Bags of Hillbilly Stills Turbo Yeast
- Hose Kit
|
|
|
|
|
|
|
|
|
|
13 Gallon Copper Moonshine Still Kit / With thermo-Port in the head
|
|
Our Price: $1,180.00
|
|
|
If you’re looking for a high quality copper moonshine still for sale, but you’re on a budget, this is the set up for you. Our 13 gallon copper moonshine still kit is the perfect beginner set up and one of our more popular copper stills for sale. This great moonshine still kit includes almost everything you need to get started on you first home distilling run. With this complete kit you get a three inch copper pot still head, 13 gallon mash pot boiler, HS5500 controller and element Kit, two bags of Hillbilly Stills’ Turbo Yeast and all of the necessary hoses and connectors. No need to set all day with this baby. With the included three inch head you will get a nice take off speed. All you need is a water supply, electricity and your favorite spirit recipe. This little bad boy runs 220 volt electricity too and with the heating system you will be up to speed and running in 30 minutes of warm up time. We guarantee this set up will give you years of great service and enjoyment. If you’ve been searching for a great moonshine still for sale, this is it!
Add one our fermenter starter kit and you have everything you need to get started on your first spirit run in no time.
This has the thermoport add to the pot still head.Thermometer not included
Here is What you Get
- 3 Inch copper pot still head
- 3 Inch tri clamp
- 3 Inch PTFE Teflon gaskets
- 13 Gallon Mash Pot Boiler
- HS5500 Controller and Element Kit
- 2 Bags of Hillbilly Stills Turbo Yeast
- Hose Kit
|
|
|
|
|
|
|
|
|
|
3" Pot Still and 26 Gallon Boiler / HS5500 Combo
|
|
Our Price: $1,325.00
|
|
|
This is a 3" Pot Still Head combined with our 26 Gallon Milk Can boiler set up. You will also receive the awesome TG5500 Heat controller. You will receive all Teflon gaskets and clamps. You can be heated up and running in about 30 minutes.
Kit includes - 3 inch pot still head
- 26 Gallon Boiler
- Clamps and seals
- hose kit
- HS5500 controller and element kit
|
|
|
|
|
|
|
|
|
|
3" Pot Still and 26 Gallon Boiler / HS5500 Combo With Thermoport
|
|
Our Price: $1,420.00
|
|
|
This is a 3" Pot Still Head combined with our 26 Gallon Milk Can boiler set up. You will also receive the awesome TG5500 Heat controller. You will receive all Teflon gaskets and clamps. You can be heated up and running in about 30 minutes. This includes the thermoport. Thermometer is not included
Kit includes - 3 inch pot still head
- 26 Gallon Boiler
- Clamps and seals
- hose kit
- HS5500 controller and element kit
|
|
|
|
|
|
|
|
|
|
Hillbilly Flute Distillation column
|
|
Our Price: $1,500.00
Sale Price: $1,450.00
Save $50.00!
|
|
|
Look no further!!! The Hillbilly Flute is handmade using the highest quality copper components on the market. This
design has been around for many years on the commercial level, but was scaled
down to a hobby sized still. Just like the
commercial perforated plate distillation columns, the 4” Hillbilly Flute has an
astounding take off rate while producing a high alcohol content, full flavored
distillate. Peering through the site glasses, you can see the reflux in action!
Like most large commercial stills the Hillbilly Flute is an easy still to run
and maintain. It features a 4” copper column with 4 perforated plates, shotgun
dephlegmator (“The Rain maker”), full irrigation plumbing to the dephlegmator,
condensate condenser (13” shotgun condenser), and a in-built parrot's
beak.
This column if for use with any boiler, just specify what size connection you require at check out. This column has a 20 week build time. It is made by hand as they are ordered.
Included: - Tri- Clamp
- EDPM O Ring seal
- Instructional DVD
- sight glass tool
The Hillbilly Flute is made from only the best high grade copper available and LEAD FREE Silver Solder. Included with this still is a DVD to teach you how to play the Hillbilly Flute!
PRODUCE QUALITY SPIRITS, EVERYTIME.
This column will produce 1+ gallons per hour at 90% or better purity. You will be amazed
|
|
|
|
|
|
|
|
|
|
6 Plate Vodka column
|
|
Our Price: $1,750.00
Sale Price: $1,675.00
Save $75.00!
|
|
|
This is a 6 plate version of the Hillbilly Flute. This is ready to attach to your existing boiler or you can order one of our first class milk cans for your new Hillbilly Flute.This column has a 20 week build time. They are built one at a time by hand.
This comes with - DVD explaining how to run this column
- Taylor / Hillbilly Still 3" Dial thermometer
- Sight Glass removal tool
|
|
|
|
|
|
|
|
|
|
Hillbilly Flute with 26 Gallon Stainless Steel Boiler
|
|
Our Price: $1,950.00
Sale Price: $1,875.00
Save $75.00!
|
|
|
This is the perfect Set up for the serious distiller. The boiler comes with a ball valve drain on the bottom and the top opens to a 6" neck. The Flute attatches to the boiler with a tri- clamp. With the distillation speed of the Hillbilly flute this is the ideal size boiler for this distillation column. The Hillbilly flute is a plated column. It is a scaled down version of the commercial distillation columns.You can make some of the best moonshine with this or high grade ethanol for fuel. With the proper permits this moonshine still can make the product of your choice. Single run Whiskey and Rum, or double run for Vodka. We welcome micro distiller business or the most demanding craft distiller
Your Hillbilly Flute also comes with a DVD teaching you how to operate your new still.
You will love this setup.
Included: - The Amazing Hillbilly Flute
- 26 Gallon boiler with filler neck, drain, and fitting for adding electric element
- DVD explaining how your new Distiller operates.
- Tri-Clamp and PTFE seal
|
|
|
|
|
|
|
|
|
|
Hillbilly Flute 13 Gallon Micro Kit with HS5500 Kit
|
|
Our Price: $2,045.00
Sale Price: $2,025.00
Save $20.00!
|
|
|
Great set up in a smaller package. The boiler comes with a ball valve drain on the bottom and the top opens to a 6" neck. The Flute attatches to the boiler with a tri- clamp. The Hillbilly flute is a plated column. It is a scaled down version of the commercial distillation columns. This comes with the HS5500 Phase Angle electric controller and element kit. This operates on 220v and will heat a 10 gallon wash in 20 minutes. You can precisely control your run and exactly replicate your results the next time you run. You can make some of the best moonshine with this or high grade ethanol for fuel. With the proper permits this moonshine still can make the product of your choice. Single run Whiskey and Rum, or double run for Vodka. We welcome micro distiller business or the most demanding craft distiller. Your Hillbilly Flute also comes with a DVD teaching you how to operate your new still. You will love this setup.This column has a 20 week build time. It is made by hand as they are ordered.
You Get - Hillbilly flute Distilling column
- 13 gallon Mash pot / Boiler
- HS5500 Phase angle Heat controller
- 5500 Watt element kit with installation plate
- DVD teaching you how to operate the Hillbilly Flute
- Tri-Clamp and all seals
- Sight Glass Tool
|
|
|
|
|
|
|
|
|
|
Turn Key Distillery with HS5500
|
|
Our Price: $2,300.00
|
|
|
At Hillbilly StillsTM we carry some of the best moonshine stills for sale you will find anywhere and our Turn Key Distillery is certainly no exception. This is the perfect moonshine still kit for the serious distiller. The boiler included in this moonshine still kit comes with a ball valve drain on the bottom and the top opens to a six inch neck. The flute easily attaches to the boiler with an included tri-clamp. With the distillation speed of the Hillbilly flute this is the ideal size boiler for this distillation column. The Hillbilly flute is a plated column and a scaled down version of more common commercial distillation columns.
The Turn Key Distillery is one of our more advanced moonshine stills and comes with a HS5500 phase angle electric controller and element kit. The heating element operates on 220 volts and will heat a 20 gallon wash in 40 minutes. With this controller you can precisely control your run and exactly replicate your results the next time you run. You can make some of the best moonshine with this kit or high grade ethanol for fuel. With the proper permits this moonshine still can make the product of your choice. Whether you’re doing a single run whiskey and rum or a double run for vodka this still will do the job.
Why attempt to build a moonshine still yourself when you can purchase your very own professional grade moonshine still from Hillbilly Stills that functions as good as it looks. We welcome micro distiller businesses or the most demanding craft distillers to try our moonshine still.
Your Hillbilly Flute also comes with a DVD teaching you how to operate your new still. You will love this setup, we guarantee. This column has a 20 week build time. It is made by hand as they are ordered.
You Get- Hillbilly flute Distilling column
- 26 gallon Mash pot / Boiler
- HS5500 Phase angle Heat controller
- 5500 Watt element kit with installation plate
- DVD teaching you how to operate the Hillbilly Flute
- Tri-Clamp and all seals
|
|
|
|
