EPDM O-ring for sealing your 2″ tri-clover (Sanitary) fitting to your beer keg.
Jesse Williams – August 25, 2011:
Anonymous – September 4, 2011:
Lucky – September 6, 2011:
great does the job.
Mick – November 11, 2011:
Perfect fit. Use a little bit of maple syrup to get them to stick while assembling.
William Thornton – November 12, 2011:
Product just as described . Delivered promptly.
William Bluman – November 24, 2011:
Didn’t get it hooked but everything is going to work well thank you.
william riegger – January 4, 2012:
good stuff and fast shipping, thanks.
Normand Archambault – February 11, 2012:
They fit in the ferrule ok did not get them right away but the extra merchandise made up for any inconveiniance
(Thanks again Mike)
Chuca – March 5, 2012:
David M – April 24, 2012:
have not used it yet, looks good
Jay Heisler – May 23, 2012:
Very good quality and price.
Anonymous – June 23, 2012:
Very fast service
ChefSteve Ricketts – November 4, 2012:
I thought I ordered the wide kind, no problem it works fine
Thomas Savoy – December 14, 2012:
Donald Pepin – January 27, 2013:
Anonymous – February 26, 2013:
The service with this company is absolutely the best. My products were on the way to me within 2 hrs of my order. The products were well built as expected but I can’t say enough for the service.
Chris Shingleton – March 1, 2013:
Seems to made of quality material and the website makes it convenient to purchase. Much better than making your own.
Cain – March 11, 2013:
I went from conception to done after utilizing your website.Everything you need and then some. Your service is accurate, fast, and reliable. Thank you and I would suggest you to anyone interested in these kinds of products.
Anonymous – March 31, 2013:
Very satisfied with the O ring for the keg. Fit perfect! I would suggest using these instead of the sanitary ones on the keg.
Anonymous – July 15, 2013:
country boy – October 25, 2013:
These things are a god send.
Daniel W – December 2, 2013:
Anonymous – December 20, 2013:
Excellent a1 thank you
Greg Pope – December 24, 2013:
Great value for the price…Thank You
Andrew Houston – December 27, 2013:
A must for keg to flange connections
Robert Rieman – January 22, 2014:
Works great between sanitary fitting and keg!
Anonymous – February 19, 2014:
Did exactly what it was intended for.
Zack Seevers – February 23, 2014:
John McCarley – March 4, 2014:
Thanks ,great service
John L Gehringer – April 9, 2014:
I expected to see buna rubber O-rings and was quite surprised when they were made of Viton.
James McMillan – April 15, 2014:
O-Ring is too thick and makes it difficult to clamp down the ferrule. But it seals very nicely
Kirk Wasson – November 29, 2014:
Made a great seal and worked with clover clamp.
Your email address will not be published. Required fields are marked *
Not that bad
Your Review *