13 gallon still and all the accessories. all you need is sugar, water, and a few mason jars
This is a top of the line plug-and-play system with everything you need to make spirits. In order to make a quality spirit you need good equipment, good ingredients, and good techniques. This kit will supply you with all three of those requirements. Perfect for anyone who wants to get into distilling but you are not quite sure where to start. With our kit you don’t need to worry about opening the box excited to get started only to be disappointed that there is something else you need. Its all here. All you need is sugar, water, and a few mason jars.
What you get:
-13 gallon pot still
3 Inch Copper Pot Still Head
Instructions on how to operate
3 inch premium dial thermometer
-220 volt heat system (much safer than open flame heating)
This is a new and improved HS5500, it comes with the addition of an on/off switch so that you no longer have to unplug the unit to kill the power. It also has 40 amp solid state relay to give better protection against relay overload for longer durability. The controller with 5500w heating element has been tested, bringing a keg to operation temperature in approximately 40 minutes. Each one of these is bench tested by the manufacturer. The unit comes without a plug so that it can be adapted to the type of receptacle you have installed or are going to install, the wires are labeled. Hook this baby to a beer keg Or a Hillbilly stills Milk Can boiler with a hot water heater element installed and you’re ready to go with a great controller. With this you will Get the HS5500 Controller and the Element Kit. It will fit on all boilers that we sell.
-2: 5 lb. sacks of Copper kings Kentucky whiskey grain
This is a special recipe of Kentucky Shiner himself AKA Copper King. This is the perfect blend for a 6 gallon mash. The directions for using this are on the label. This is loved by people from all across the united states that have used it.
-Complete fermentation kit
2- 7 Gallon fermenters with Lids
2- Air Locks
Plastic Test Jar
4 Bags of yeast
Large Plastic Spoon
2- Stick on Thermometers
These systems are currently on a 4-5 week build time.